Canyon CNP-WF518N1 Page 4 User Manual Download | Manualshive

Page: 4 / 65

background image

1

Thank you for purchasing CANYON CNP-WF518N1. We sincerely wish you to
enjoy the 802.11b/g wireless network adapter. It is an easy-to-install device that
connects to PC (Ad-Hoc mode for peer-to-peer file sharing) or connects to a wireless
router/access point (for internet connection). To fully utilize the functions and
features of CANYON CNP-WF518N1, please read through the user manual before
you get started.

Introduction

Safety Precautions

Please observe all safety precautions before using the device. Please follow all
procedures outlined in this manual to properly operate the device.

z

Do NOT attempt to disassemble or alter any part of the device that is not
described in this guide.

z

Do NOT place the device in contact with water or any other liquids. The device
is NOT designed to be liquid proof of any sort.

z

In the event of liquid entry into device interior, immediately disconnect the
device from the computer. Continuing use of the device may result in fire or
electrical shock. Please consult your product distributor or the closest support
center.

z

To avoid risk of electrical shock, do not connect or disconnect the device with
wet hands.

z

Do NOT place the device near a heat source or directly expose it to flame.

z

Never place the device in vicinity of equipments generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or data corruption and loss.

z

All images in the user manual are for user reference only. Actual products
might differ slightly than images shown here.

«
...
2
3
4
5
6
...
»

Summary of Contents for CNP-WF518N1


































































Reviews:

No comments

Related manuals for CNP-WF518N1

Brand: Paradyne Pages: 2

Brand: Radicom Research Pages: 9

Brand: LevelOne Pages: 29

Brand: LOOP Electronics Pages: 4

Brand: Amped Wireless Pages: 2

Brand: Teletronics International Pages: 2

Brand: TRUlink Pages: 36

Brand: 3idee Pages: 7

XAV1501 - Powerline AV+ 200 Adapter

Brand: NETGEAR Pages: 2

Brand: Wyze Pages: 4

Brand: Compex Pages: 2

Brand: Jabra Pages: 2

Brand: Daikin Pages: 20

Brand: Alpine Pages: 44

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

MHC-EC78Pi - Mini Hi-fi Component System

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands