Maintenance
-46-
5
Drive Train
• Stop the engine when servicing the drive train.
• Allow the machine to cool off before servicing. The engine is very hot after
operation and may pose a burn hazard.
Tracks
1. Hoist the machine.
2. Inspect the clearance between track and the
track frame to be between 60 and 70mm.
Adjust tracks if the clearance is not within
this range.
Inspecting
• Hoist the machine securely when inspecting and adjusting the track. Use
hoisting slings of sufficient strength. Always use the slings of the same length
when more than one is used.
• Make certain to adjust track tension properly. Inproperly tensioned tracks may
wear or come off, resulting in property damage, serious injury or death.
3683M-0507-010E
Lock Nut
Adjust Nut
60 - 70mm
Track Frame
• Track stretches during its use-life. Inspect and adjust regularly.
NOTE
• Always unload the machine before hoisting.