CanyCom S160 Operator'S Manual Download Page 51

Page: 51 / 75

Maintenance

-42-

1. Remove oil filler cap.
2. Follow the instructions in the

Operator's

Manual for the engine

to fill oil.

3. Put oil filler cap back in place and tighten it

securely.

Filling

1.  Have an appropriate oil drain pan.
2.  Remove drain plug to drain oil.
3.  Clean drain plug and put it back in place and

tighten it securely.

4. Fill oil.
5. Close engine cover.

Changing

3683M-0506-020E

Oil Filler Cap

• Oil Capacity: 3.3L
• Oil to Use: Diesel Engine Oil, API rating

GL-4 or 5, SAE index 10W-30.

• Removing oil filler cap helps drain oil faster.

3683M-0506-030E

Drain Plug

NOTE

Oil Filter

1. Open engine cover.
2. Follow the instructions in the

Operator's

Manual for the engine

to change oil filter

cartridge.

3. Fill oil.
4. Close engine cover.

3683M-0506-040E

Oil Filter Cartridge

Summary of Contents for S160












































































Search results

Summary of Contents for S160

Reviews:

Related manuals for S160

Brands by name

Popular brands

CanyCom S160, Operator'S Manual

Search results

Summary of Contents for S160

Reviews:

Related manuals for S160

Brands by name

Popular brands