-23-
Operation
4
5347M-0401-121E
Seat Safety Switch Bracket
Bolts
3. Remove the 2 bolts fixing the seat safety
switch bracket.
4. Move the seat switch safety bracket to a
desired position and fix it with the bolts firmly.
5. Pull the safety lock back and lower the seat.
Adjusting Seat Height (Rear Part)
1. Slide the seat to the rear-most position.
2. Raise the seat and push the safety lock
inward to hold the seat in position.
• Move the seat and see if the seat is locked
securely.
• The height at the rear can be adjusted in 4
levels (2 for the Oceania version).
• The seat safety switch bracket is mounted
in the highest position when shipped from
the factory.
NOTE
5347M-0401-152E
Bolt
Front Hole
Seat hinge Bracket
3. Remove the 2 bolts to remove the seat hinge
bracket.
4. Turn around the seat hinge bracket and
mount it to floor with the bolts through the
front holes.
5. Hold the seat in place and install the shaft
and hold it with the snap pin, in the reverse
order of 2.
6. Pull back the seat safety pin and lower the
seat.
