CanyCom CM1305 Operator'S Manual Download Page 32

Page: 32 / 59

MAINTENANCE

– 27 –

Steering wheel

Tire, wheel

Brake

Rod, link, and

wires

Body, cover

Headlamp

• Drive vehicle and turn steering

wheel right and left for firm
steering operation.

• Check tire pressure and groove

depth.

• Check tire/wheel for crack,

damage, and partial wear.

• Check tire groove for foreign

objects such as metal fragments
and gravel.

• Check wheel bolt/hub nut for

looseness or missing parts.

• Check wheel bearing for looseness,

abnormal noise and overheat.

• Drive vehicle and operate brake

pedal and parking brake. Check the
operation.

• Check brake pedal free play.

• Check rod/link/wires for damage

and looseness at connection.

• Repeatedly operate brake and

check connection for looseness and
missing split pins.

• Check body and cover for crack,

deformation, and loose/missing
bolt/nut.

• Operate light switch and check

headlamp operation.

• Check lamp for lens damage or

water intrusion.

Proper steering.

Within criterion.

No crack, damage, or
partial wear.

No foreign object.

No looseness or missing
parts.

No looseness, abnormal
noise or overheating.

Proper brake etfect.

Proper amount.

No damage or looseness.

No looseness at
connection or missing
split pins.

No crack, deformation, or
loose/missing bolt/nut.

Normal operation.

No damage or water
intrusion.

Inspection:

Page 42

Adjustment:

Page 42

Timing

Pre-op

Yearly

Monthly

Content

Remarks

Item

Dri

ing

system

Brak

Body

Lamp

system

Summary of Contents for CM1305




























































Search results

Summary of Contents for CM1305

Reviews:

Related manuals for CM1305

Brands by name

Popular brands

CanyCom CM1305, Operator'S Manual

Search results

Summary of Contents for CM1305

Reviews:

Related manuals for CM1305

Brands by name

Popular brands