CanyCom CM1305 Operator'S Manual Download Page 44

Page: 44 / 59

Cleaning

1. Clean the spark plug using a wire brush or plug cleaner.

2. Grind the electrode with sandpaper to adjust the gap as

specified.

Standard clearance : 0.9 to 1.0 mm

3. Replace the spark plug.

7.7.3

Fuel Cock (Fuel Filter)

• Clean fuel filter every 100 hours of operation.

• Clean filter in a neat non-dusty place.

Cleaning
1. Check and confirm that fuel cock is closed.

N O T E

2. Remove filter pot, oil seal and fuel filter.

3. Remove deposits (dust or water etc.) inside of filter pot.

– 39 –

MAINTENANCE

2. Remove the spark plug using a plug wrench.

3. Check the plug for the following points and clean or

replace it as necessary. (Specifications for spark plug :

Page 11)

•

Presence or absence of breakage of the insulator

•

Worn electrode

•

Carbon deposit

•

Damage to and breakage of gasket

•

Degree of burning of insulator in spark section

Degree of burning

Damage

Breakage

Wear, car-
bon deposit

Fuel
filter

Oil
seal

Filter
pot

Summary of Contents for CM1305




























































Search results

Summary of Contents for CM1305

Reviews:

Related manuals for CM1305

Brands by name

Popular brands

CanyCom CM1305, Operator'S Manual

Search results

Summary of Contents for CM1305

Reviews:

Related manuals for CM1305

Brands by name

Popular brands