Safety
-4-
1
Operation
• Fuel is highly flammable. See Checking and Filling Fuel, page 16, for important
safety information on handling fuel.
• Do not operate the engine in a confined space where dangerous carbon monoxide
fumes can accumulate.
This machine is intended for brushcutting. By using other implements made or certified
for this machine, it can perform other tasks. Use only the implements designed or certified
specificly for this machine. Use of other implements may adversely affect the performance or
stability of the machine and can cause damage or accident.
The stability of the machine is affected by the speed, rate of steering, terrain and load.
Always pay close attention to these factors or a loss of control or overturn could occur,
resulting in property damage, serious injury or death.
General Driving
• Always wear protective footwear, long trousers, hardhat, safety glasses and ear
protection when operating or servicing the machine. Proper clothing will minimize
the chance of injury. Do not operate the machine if you have long hair, loose
clothing, or jewelry; all of which may get tangled in the moving parts. Do not
operate the machine barefoot or with open sandals.
• Prepare beforehand the working rules and procedures such as signaling and trafic
control for the work place. Following such rules will reduce the risk of accidents.
• Never handle fuel, lubricants or other flammable materials, service engine, or
recharge battery in the presence of fire or spark.
• Perform daily pre-startup inspection (see Preparation, page 16) before starting the
machine. Repair or replace damaged parts before starting the machine. Clean the
machine of cut grass or such refuse to avoid fire.
Preparation
