CanyCom CG431 Page 22 Operator'S Manual Download

Page: 22 / 88

-13-

Controls and Components

12 Automatic Step Levelling

. Automatic step levelling switch turns on or off automatic

leveling function of step.

13 Manual Step Levelling

. . . . Manual step levelling switch is used to level step manually.

14 Implement Height

. . . . . . . Implement height lever is used to set the minimum height

of implement.

15 Safety Switch

. . . . . . . . . . . Machine stops if safety plug is detached.

16 Parking Brake Indicator

. . . Parking brake indicator lights when parking brake is

engaged.

17 Coolant Temperature

. . . . . Coolant teperature warning lamp lights up when

coolant temperature is beyond normal operating range
(overheating).

18 Oil Pressure Warning

. . . Oil pressure warning lamp indicates if oil pressure is

normal. Under normal condition, it goes off when engine
starts.

19 Charge Lamp

. . . . . . . . . . . Charge lamp indicates the condition of battery charge

system. Under normal condition, it goes off when engine
starts.

20 Implement Indicator

. . . . . . Implement indicator lamp lights up when implement is

rotating. It also indicates the rotating direction.

21 Auxiliary Transmission

. . Auxiliary transmission indicator lights up when auxiliary

tramsmission is in [ (fast)] mode.

22 Fuel Gauge

. . . . . . . . . . . . . Fuel gauge indicates the fuel level.

23 Hour Meter

. . . . . . . . . . . . . Hour Meter displays and records the total amount of time

machine has been in use, in the unit of 0.1 hour.

24 Coolant Temperature

. . . . . Coolant temperature meter displays the coolant

temperature.

Switch

Lever

Warning Lamp

Lamp

Meter

Summary of Contents for CG431

























































































Search results

Summary of Contents for CG431

Reviews:

Related manuals for CG431

Brands by name

Popular brands

CanyCom CG431, Operator'S Manual

Search results

Summary of Contents for CG431

Reviews:

Related manuals for CG431

Brands by name

Popular brands