9
If Windows 98, Windows Me or Windows 2000 does not start the Add New Hardware Wizard.
NOTE:
For Windows 2000 you must have administrator access rights to install the driver.
1. Put the CD into CD_ROM.
2. Choose the icon of TOUCHSCREEN driver.
3. Choose operation system for USB, eg. Window xp_X86.
4. Select SETUP.exe ,then run to install.
5. Select NEXT according to the prompt till installation finished.
5.
ADJUSTMENT
This touchmonitor will not likely require adjustment. Variations in video output and
application may require adjustments to the touchmonitor to optimize the quality of the
display.
For best performance, the touchmonitor should be operating in native resolution 800 x 600.
Use the Display control panel in Windows to choose 800 x 600 resolution. Operating in other
resolutions will degrade video performance.
All control adjustments are automatically memorized.
5.1 How to Use OSD Menu
6
1 2 3 4 5
1. Entering the OSD Menu
Press the MENU Button once to display the OSD Menu.
2. Making Adjustments and Settings
a. Select the desired sub menu icon using the Control buttons and press the MENU button.
The sub menu appears.
b. Use the Control buttons to select the desired setting icon and press the MENU button. The
setting menu appears.
c. Use the Control buttons to make all required adjustments and press the MENU button to
save the settings.
(1) Auto Button
(2) Control Button (Increasing)
(3) Control Button (Reduce)
(4) Menu/Enter Button
(5) Power On//Off Button
(6) Power Indicator
Power Indicator
Green
Operation
Orange Closed
Off
Power Off
