3
85
English
Network Select [NWC]
At this menu the connection way of the WiFi module is set. The module can be connected wirelessly [WLA] or wired [ETH] using the Ethernet port of the
BRA 3 / VRA 3.
To change the connection way from wireless to wired, do the following:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu Network Setup [NWS] and confirm with the "OK" button.
3
Select the item Network Select [NWC] and confirm with the "OK" button.
4
Select the wanted connection way using the "+" or "-" key and confirm with the "OK" button.
5
Press the "M" button to exit this menu item.
Network Reset [NWR / WIR]
This function is to reset all network settings stored on the BRA 3 / VRA 3.
Note:
In case the BRA 3 / VRA 3 is connected to a TV using the HDMI ARC output, the speaker display shows [NWR], In case no TV is connected to the
BRA 3 / VRA 3, the display indictaes [WIR].
Caution:
All settings you have made and stored on the speaker's WiFi module will be deleted.
To perform the reset by remote control, proceeed as follows:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu Network Setup [NWS] and confirm with the "OK" button.
3
Select the funktion Network Reset [NWR] and confirm with the "OK" button.
4
The menu shows "Reset, the display shows [YES].
Note:
If you want to cancel the reset procedure, select No [NO] using the
" "
or " " button and press "OK", or easily press the menu key "M".
5
Now, you can press "OK" button to perform the reset. If you press "OK", the OSD shows “Please Wait!”.
6
After the reset procedure (approx. 30 to 40 seconds), the speaker enters the Network Setup menu.
