74
English
Distance [DST]
An adjustment of the distance between speaker and listening position is needed for a perfect spatial effect in case of multichannel input signals. Measure
and enter the distance between the speakers and your listening position. The distance is adjustable between 0.0m and 9.9m, in steps of 0.1m, where 3.0m
is the factory setting.
1
For adjusting the distances, enter the menu item Distance within the Speaker Setup menu, as done for the Channel Level menu.
2
Select the relating distances for the Front Left and Front Right (for the left and right front speakers) and the distance between the height speakers Top
Front L. and Top Front R. and the ceiling.
3
The other speakers Surr. Right, Surr. Left, and Subwoofer are greyed out and become only available (white colored) in case of physically available,
wirelessly connected loudspeakers.
Voice clarity, Enhancement of speech intelligibility [VOI]
Use the “Voice” function to boost speech intelligibility. This allows you to better understand dialogues (speech) in films with loud effects,
for example. To activate respectively. deactivate the function, please do as follows:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu Speaker Setup [SPS] and confirm with the "OK" button.
3
Select the item Enhancement of speech intelligibility [VOI] and confirm with the "OK" button.
4
Use the "+" or "-" button to switch the “Voice” function on [ON] or off [OFF].
5
Press the "M" button to exit this menu item.
Room height [RHE]
For optimum spatiality with multi-channel input signals (such as Atmos), it is necessary to adjust the room height.
The distance is between 50cm and 500cm adjustable in steps of 1cm, whereby 250cm is the factory setting.
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu Speaker Setup [SPS] and press the "OK" button to confirm.
3
Select the menu Room height [RHE] and confirm with the "OK" button.
4
Use the "+" or "-" button to select the corresponding room height and confirm with the "OK" button.
5
Press the "M" button to exit this menu item.
