3
95
English
Problem
Possible cause
Solution
The BT input cannot
be selected via the
“Input” buttons.
The function BT Select [BTS] is activated.
The switching happens in this case automatically as soon as the
BRA 3 / VRA 3 detects an audio signal from the device.
If unwanted, set BT Select (BTS) to manual
The BRA 3 / VRA 3
does not automatically
switch to the BT input.
1. The BT Select function is deactivated (MAN).
1. Activate the BTS function (AUT).
2. Bluetooth
®
is disabled on your device.
2. Activate Bluetooth
®
on your device.
3. The BRA 3 / VRA 3 is connected to
another device.
3. Disable Bluetooth
®
on the other device.
4. The device is not paired with
the BRA 3 / VRA 3.
4. Pair your device with the BRA 3 / VRA 3.
No playback via
Bluetooth
®
wireless
technology.
1. There is no connection between the BRA 3 /
VRA 3 and the mobile device.
1. Connect mobile device as described.
2. The mobile device is paired,
but it does not play.
2.1. The mobile device needs to be reconnected.
2.2. Set the volume on the mobile device to the
maximum possible value.
2.3. Increase the volume of the BRA 3 / VRA 3.
2.4. Make sure that sources of interference, such as a
WiFi router or a laptop, are not placed in close proximity
to the BRA 3 / VRA 3.
2.5. Simultaneous operation via WiFi and Bluetooth
®
connection from a mobile device is not possible
without interference in some cases; therefore, disable
WiFi on the device.
3. You are out of reach (max. 10 m).
3. Reduce the distance between the speaker
and the mobile device.
