3
89
English
BT Reset [BRE]
This function is to reset all Bluetooth wireless technology settings stored on the BRA 3 / VRA 3.
Caution:
ALL settings you have made and stored on the speaker will be deleted.
To perform the reset, proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu Bluetooth Setup [BT] and confirm with the "OK" button.
3
Select the menu item BT Reset [BRE] and confirm with the "OK" button. The menu shows Reset, the display shows [YES].
Note:
If you want to cancel the reset procedure, select "No" [NO] using the"+" or "-" key. and confirm with the "OK" button.
4
Now, you can press "OK" to perform the reset. If you press "OK", the OSD shows “Please Wait!” for a few seconds.
5
After the reset procedure, the speaker enters the Bluetooth Setup [BT] menu.
6
To leave the menu, press the"M" button.
AutoPlay [APL]
If this function is activated [ON], the playback of a previously connected device with Bluetooth® wireless technology will start automati-
cally when the BRA 3 / VRA 3 is switched on (using the remote control). This starts playback of the app last opened on the mobile device.
Do the following to activate resp. deactivate this function:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu Bluetooth Setup [BT] and confirm with the "OK" button.
3
Select the item AutoPlay [APL] and confirm with the "OK" button.
4
Select the wanted parameter [ON] resp. [OFF] using the "+" or "-" key.
5
Confirm by pressing the "OK" button. To leave the menu, press the"M" button.
Note:
Depending on the operating system of the mobile device and the app, the app must run in the foreground or at least in the
background. If there is no app or one that does not support background operation, playback will not start.
