Canton musicbox Air 3, User Manual

Page: 29 / 52

29
English
Option 2 Manual log-in to your WLAN router
Requirements:
- the musicbox Air 3 must be connected to the mains and switched on. the led ring must not be flashing
rapidly (2x per second) green or red
- you have a WlAN router that works in the 2.4ghz frequency range
- the router must be within range of the musicbox Air 3
- you have a WlAN device with an internet browser (Mac/pc, ipod, iphone, smartphone, etc) and you
need to know the access details for your wireless network resp. your router
- When using a Mac or pc, you may only connect to the router by WlAN. the WlAN adapter on your
computer must be activated in the system and on your hardware where necessary (switch at pc, if available)!
Procedure:
the following two steps are the same for all manual log-in methods:
1. press the “Wp setup” button on the musicbox Air 3 until the led ring starts to flash alternating
red and blue
2. connect your WlAN device (Mac/pc, ipod, iphone, smartphone, etc) to the network
“musicbox Air 3 XXXXXX” by following the steps described on the following pages
Attention:
it can take up to 60 seconds for the network “musicbox Air 3 XXXXXX” to become available
Further steps (depending on your WlAN device):
- log-in using an ipod touch, iphone or ipad > page 30
- log-in using a smartphone with an Android operating system > page 32
- log-in using a pc with Windows Xp > page 34
- log-in using a pc with Windows 7 > page 36
- log-in using a Mac with Mac os X > page 37