Canton DIGITAL MOVIE DM 90, Manual

Page: 55 / 68

55
Deutsch
English
Memorizing a radio station
To program a radio station, begin by starting the search. Please wait until the name of the radio station is shown in the upper line of the
display and press the „OK“ key to initiate the save process. If the dispaly does not show the radio text after approximately 10 sec. either
the signal strength is too weak or the radio station does not have RDS information. In this case you can save the station without the radio
text.
The two small digits (presets) to the left of the frequency begin to flash for at least 5 seconds. During this time, select the desired preset
using the keys. Only when „saved“ appears in the display the radio station has been programmed. If you have stored the radio
station inadvertently under a wrong name, wait until the name appears in the second line and than press the „OK“ key.
Tuner
The Canton DM systems have an integrated FM tuner with RDS feature which is selected via the input keys in the main menu of the remote
control. The menu key is used to change or memorize the radio frequency. This takes you to the Tuner Setup menu, where you can adjust the
following settings:
The
automatic search function is activated by pressing and holding (>1 sec.) the keys (search upwards or downwards). The system
stops automatically every time it finds a station with sufficient field strength.
The
manual search
function is activated by briefly pressing the keys. This function is used for the fine tuning of a radio station.