Canton DIGITAL MOVIE DM 90, Manual

Page: 47 / 68

47
Deutsch
English
The volume of the DM system can be regulated in 100 increments from
0..99 via
< volume > in the main menu and in the IR mode. If the DM
system is in one of the sub-menus, the volume cannot be altered in the
DM or IR mode.
When you switch on, the remote control starts off in the main menu .
From there, you can access the Speaker Setup and Parameter Setup via
the Menu key. This provides you with more adjustment options. The
remote control menus are set up in a loop, which means that you will
always arrive back at the starting point by pressing in one direction.
You can switch between the logged on RF devices, such as DM 1 and
DM 2, and the memorized remote control codes in the IR mode with
< select > .
Note: The functions of the < select > keys are only activated when at
least one additional device has been logged on and/or programmed by
you in addition to the DM system already logged on.
You will find more information on this on Page 58.