MicroBio MB2-HiFlow
Technical Specification
* Based upon random samples until low battery warning given.
These tests were undertaken on units fitted with
new and fully charged Ansmann Max-e 2500 mA.Hr NiMh cells. Actual battery life may vary due to volume taken
per sample, interval between samples, age of cells, and other environmental effects, such as humidity and
temperature.
‡ Calibrated at 1013mbar 20ºC. Environmental conditions will affect air pressure thus mass/volumetric flow rates.
Flow Rate:
180 L.min
-1 ‡
Sample Volume:
10 to 10,000 litres in varying steps
Sampling Volume Capacity: ~ 40,000 litres before recharge*
d50 Particle size:
1.71 µm
Mean particle velocity:
9.55 ms
-1
Weight (excluding charger
and carry bag):
840g (inc. battery and petri dish)
Dimensions:
196 x 100 x 110mm (inc. head)
Power:
4 x AA NiMh Cells
6V at 600mA (maximum)
Noise Level:
< 80dB @ 1m
Environmental Operating
Range:
-10 to 50°C up to 90% RH
‡
Sampling Plate:
90mm petri dish
Sampling Head:
Stainless Steel 400 x 1.0mm holes
8
