⓮
Install Hand spay hand set
31
, to the
curved joint holder
28
.
Ensure that the Check valve
30
, is inserted
into the end recess of the hand set.
Place the rubber washer
29
, between the
hand set
31
, and the curved joint holder
hand firmly screw into place.
Installation Instructions Model : Z3314--44
Further information Phone (03) 9761 4603 [email protected]
9
Pull the male end of the flexi hose
33
,
through from the bottom end of the hand
spray escutcheon.
Connect the flexi hose to the curved joint
holder ensuring that the O-ring
32
, is
placed on the male end of the flexi hose.
Insert Check valve
35
, into the thread
adapter
34
, recess. Screw the adaptor into
the Diverter output together with rubber
washer
36
.
Secure the female end of the flexi hose
onto the adapter, together with the rubber
washer
36
.
Fix the weight
37
, onto the hand spray flexi
hose. Position the weight along the flexi
hose so as to prevent the excessive tension
on the flexi hose connections when fully
extracted.
⓯