Zodiac FR100
TM
Page 12 of 15
Installation Manual
June 2014 • Rev. 1.2
WIEGAND READER – H1000 CONTROLLER
NOTE:
Do not use supplied plug-in transformer
as the reader is powered
by the controller. Only use supplied transformer in standalone application.
NOTE:
The H1000
®
controller supports Cansec’s 37-bit format as well as
standard 26-bit format and HID 35-bit Corporate 1000 format.
Wiegand
cables
D0 & D1
Power from
controller to
reader
Do not use supplied
transformer in this configuration
if only a single FR100 is
connected.
CAUTION
: If more than one FR100 readers are
to be connected to the H1000, a separate power
supply should be used to power them due to the
500 mA draw per reader.
X