RADIO SHUTTER CONTROLLER SRM-22
OPERATION MANUAL
ZAMEL
Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
tel. +48 (32) 210 46 65, fax +48 (32) 210 80 04
www.zamel.com
, e-mail: [email protected]
plik: SRM-22_inst_ext_gb | modyfikacja: 30.05.2018
The symbol means selective collecting
of electrical and electronic equipment.
It is forbidden to put the used
equipment together with other waste.
APPEARANCE
FEATURES
TECHNICAL DATA
DESCRIPTION
● Controlling shutters or other devices driven
with single-phase 230 VAC motors.
● Independent control of two shutters/motors
● Compatible with EXTA LIFE system control-
ler and transmitters
● Duplex transmission enables information on
the current position of the shutter in the mo-
bile app,
● Maximum load 350 W (2 A) – class AC3 per
shutter,
● Programmable inputs (local or central con-
trol function),
● Single or double shutter button can be con-
nected for local and central control,
● Programmable movement time for each
shutter,
● 2 programmable “Favourite” settings for
transmitters and external inputs,
● Up to 4 programmable “Favourite” settings
for calling up from the app,
● 2 operating modes for work with transmit-
ters (local / central),
● Open - stop - close control from the app +
slider control.
The SRM-22 shutter controller is designed
for controlling window shutters or other equip-
ment driven with single-phase 230 VAC motors.
It can control two shutters independently. Control
can be routed wirelessly from transmitters or an
EXTA LIFE controller or wired from shutter push
buttons. To use wired control, use two pairs of in-
puts (IN1 and IN2), which are configurable using
a mobile app. Inputs can operate in local or cen-
tral control modes. In both cases, dual and single
shutter buttons can be used. Thanks to duplex
communication between the controller and the
control unit the current position of the shutter,
i.e. closing level is shown in the mobile app.
Duplex communication also enables controller
parametrisation and remote transmitter addition
(without physical access to the receivers). The
frame coding encryption system provides se-
cure control which is of particular importance in
the case of window shutters and garage doors.
SRM-22 can be controlled using a control unit
and also using the EXTA LIFE system transmit-
ters. You can register more transmitters with a
receiver to enable shutter control from several
locations. The product is designed for installing
in switchgears using a TH35 bar. With remote
update functionality from the controller. To further
enhance the controller’s functionalities, there is
programmable movement time for each shutter
and you can define up to four favourite settings.
Catalogue designation SRM-22
Rated supply voltage 230 VAC
Rated frequency 50 / 60 Hz
Rated power consumption 0.65 W – standby
Transmission RF – ISM 868 MHz (868.50 MHz) band
Transmission mode duplex – 9600 bps
Maximum power 14 dBm (25 mW)
Encryption 128-bit key algorithm
Operating range max. 300 m in open areas
Optical signalling of transmission/programming Yes - green STATUS LED
Maximum number of paired buttons* 96 pairs for the whole controller (both shutters)
Shutter movement signalling Yes - 4 red LEDs
Current shutter position information Yes – in EXTA LIFE mobile app (shutter closure
perc icon)
Operation modes in co-operation with EXTA LIFE system
transmitters local, central, 2 “favourite” settings
Operation modes in co-operation with an EXTA LIFE controller Open, stop, close / shutter closing level in percent
set using a slider, up to 4 “favourite” settings
Number of external outputs 4 (2 per shutter)
Co-operation with shutter buttons* Only spring-action shutter buttons, single or double
buttons
Operation modes for external input Local or central for the local mode and double shutter
button – 2 “favourite” settings can be called up**
Shutter movement time*** Programmable from 1s to 10 minutes (Default time
120 s)
Relay contact parameters 4 × 5A/250VAC
Maximum load 2 x 350 W (2 A) – class AC3
Supported motors Single-phase 230 VAC with limit switches or overload
switches
Number of termination points 12 (conductor cross-section up to 2.5 mm2)
Enclosure mounting TH35 bar
Operating temperature range -10 to +55°C
Enclosure protection rating IP20
Dimensions Double module (2DIN) housing 90 x 35 x 66 mm
Weight 0.125 kg
* applies to the complete controller (i.e. the buttons assigned to shutters 1 and 2) with button type configured using
the EXTA LIFE mobile app
** with a single button only one “favourite” setting is called up
*** closing and opening times programmed separately
Zamel Sp. z o.o. hereby declares that the
SRM-22 radio equipment type conforms
to Directive 2014/53/EU.
Transmit / receive signalling / status
during programming operations
PROG. button - programming
LEDs for signalling number of shutter selected during
programming operation and movement direction of a
shutter during standard operation
Antenna socket
Input terminals (for connection of spring-action
shutter buttons) shutter-1 and shutter-2
Output terminals for connecting motor for shutter-1 (M1)
Output terminals for connecting motor for shutter-2 (M2)
Power terminals
