background image

 

 

 

 

 

 

 

 

 

 

 

CanProx Proximity/Keypad Reader 

Installation Instructions

 

August 2018 • Rev. 1.6

 

Page 3 of 14

 

Specifications (P-640) 

Description: 

 .................................................................... CanProx Proximity/Keypad Reader  

Compatible with both AWID and HID 125kHz credentials 

Model

s: 

 

P-640-HA ................................................................................. Standard 26-bit Wiegand 

 

P-640-HA37................................................................................ Cansec 37-bit Wiegand 

 

Warranty:

  ............... Limited lifetime warranty against defects in material and workmanship 

Operating Voltage:

  .............................................................................................. 5 to 16 VDC 

Current Draw:

  ..................................................... 30 mA min., 70 mA typical, 110 mA max. 

 

Reader Output Formats:  
 

Model P-640-HA

 .................................................................................... 26-bit Wiegand 

 

Model P-640-HA37

 ................................................................... Cansec 37-bit Wiegand 

 

Keypad Output Formats:  
 

Model P-640-HA

 ............................................. 8-bit burst* (default) & 26-bit Wiegand 

 

Model P-640-HA37

 ............................. 8-bit burst* (default) & Cansec 37-bit Wiegand 

 

Frequency:

  ................................................................................................................... 125 KHz 

Range:

  .................................................... up to 7” (varies with reader voltage and credentials) 

Operating Temp: 

 ................................................................ -40 °C to 65 °C (-40 °F to 149 °F) 

Dimension (HxWxD):

 ............................ 117mm x 76mm x 19mm [4.6 in x 3.0 in x 0.77 in] 

 

Weight:

  ...................................................................................................... approx. 113 g (4 oz) 

Certification:

  ........................................................................................ FCC, ICC, CE, C-Tick 

Colour:

  .............................................................................................................................. Black 

Housing:

  ........................... Electronics sealed in weather and tamper resistant epoxy potting 

Mounting:

  ............................... Metal or plastic US Single-gang wall mount and flat surfaces 

Environment: 

 .................................................................................................. Indoor/outdoor  

Rated IP 67:

  ................................. Sealed against dust; protection against powerful water jet 

LED:

   .................................................................................... Four-state (red, green, amber, off) 

Beeper:

  ........................................................................................................................ Standard 

Cable:

  .... up to 7 conductors, 22 AWG, stranded, overall shield; 150 m (500 ft) max length 

 

*May also be configured to output keypad data in 4-bit burst mode for use with H1000 controllers. 

 

 

Specifications subject to change without notice. 

Summary of Contents for P-640-HA















Reviews: