Canon zr10. Instruction Manual Download

Page: 11 / 113

Quick Overview

Powering Your Camcorder

Before operating your camera, you will need to use the power adapter to:

Provide power from an AC outlet
or
Charge a battery pack

• The power adapter converts current from a household power socket (100–240 V

AC, 50/60 Hz) to the DC current used by your camera.

• If the adapter is used next to a TV, it may cause bars to appear on the TV —

move the adapter away from the TV or the antenna cable.

Connecting the camera to an AC outlet

Use the power adapter to provide your camera with instant power from an AC
outlet. Always turn the camera off before connecting/removing the power source.

1. Connect the power adapter to the camera’s DC IN terminal.

2. Connect the power cable to the power adapter.

3. Plug the adapter into an AC outlet.

4. Disconnect the power adapter from the camera after use. Unplug

the power cable from the AC outlet, then disconnect it from the
adapter.

2_ZR10_E(07-33) 3/10/00 18:19 Page 11 (1,1)

Summary of Contents for zr10.


















































































































Search results

Summary of Contents for zr10.

Reviews:

Related manuals for zr10.

Brands by name

Popular brands

Canon zr10., Instruction Manual

Search results

Summary of Contents for zr10.

Reviews:

Related manuals for zr10.

Brands by name

Popular brands