Canon zr10. Instruction Manual Download Page 77

Page: 77 / 113

Editing

Operate from either the body of the camera or the wireless controller.

1. Find a point on your recorded cassette slightly before the section

you want to copy and set it to playback pause mode.

2. Press the REC PAUSE button.

• S-video and A/V IN/OUT terminals automatically work as input terminals.
• The camera enters record pause mode.

3. Start playback on the other device while you monitor the picture.

4. Press the pause button.

• Recording starts.

5. When you get to the point where you want to stop recording, press

the stop button or the pause button.

• Recording stops.

6. Stop playback on the other device.

• You can monitor the picture in the viewfinder or LCD.

Dubbing

4_ZR10_E(73-85) 3/9/00 7:58 PM Page 77 (1,1)

Summary of Contents for zr10.


















































































































Search results

Summary of Contents for zr10.

Reviews:

Related manuals for zr10.

Brands by name

Popular brands

Canon zr10., Instruction Manual

Search results

Summary of Contents for zr10.

Reviews:

Related manuals for zr10.

Brands by name

Popular brands