White Balance
62
Custom White Balance
You can store two custom white balance settings in the camcorder for
future use.
1 Press the WB button to select the
F
A or
F
B custom setting.
• The
F
A or
F
B appears next to the color temperature on the
screen. If another icon appears or no icon appears, press the button
again until the desired icon appears.
2 Point the camcorder at a white object so that it fills the whole
screen.
• Use the same lighting conditions you plan to use when recording.
3 Press the
S
button.
• The
F
A or
F
B icon will flash quickly.
• Make sure the white object fills the screen until the procedure is
completed.
• After the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the
camcorder.
NOTES
• Set the [
l
Camera Setup]
[Tele-converter] setting (
0
146) to [Off] in advance.
• Readjust the custom white balance if the light source changes.
• Very rarely and depending on the light source,
F
may keep flashing (it will change to a slow flashing). The
result will still be better than with the auto white balance.
