Canon XF100 Instruction Manual Download Page 151

Page: 151 / 186

151

Menu Options

[Metadata Display]:

Displays the date and time of recording and/or the camera data (shutter speed, aperture

value, gain) during playback.

[Audio Level]:

Displays the audio level meter when set to [On].

[Custom Display 1] settings

[Zoom Position]:

Controls when the zoom indicator appears.

[Always On]: Always appears on the screen.

[Normal]: Appears only when operating the zoom.

[Light Metering]:

When set to [On], the light metering icon (

) is displayed if [

Camera Setup]

[Light Metering] is set to [Backlight] or [Spotlight].

[Custom Picture]:

Displays the custom picture icon (

) when set to [On], indicating that a custom picture

profile will be recorded with a clip.

[ND Filter]:

Displays the ND filter icons (ND

, ND

) when set to [On].

[Focus Mode]:

Displays the focus mode icon (

) when set to [On].

[Object Distance]:

Controls when the distance to the subject is displayed.

[Always On]: Always appears on the screen.

[Normal]: Appears only when operating the focus.

[Full Auto/Lock]:

Displays the full auto icon (

) and lock icon (

) when set to [On].

[Infrared]:

Displays [Infrared] and infrared light icons (

) when set to [On].

[White Balance]:

Displays the white balance indicator when set to [On].

[Exposure]:

Displays the exposure bar when set to [On].

[Iris]:

Displays the aperture setting when set to [On].

[Gain]:

Displays the gain setting when set to [On].

[Shutter]:

Displays the shutter speed setting when set to [On].

[Conversion Lens]:

Displays the WD-H58W icon (

) and TL-H58 icon (

) when set to [On].

[Tele-converter]:

Displays the digital tele-converter icon (

) when set to [On].

[Peaking]:

Displays the peaking icon (

) when set to [On].

[Magnification]:

Displays the screen magnification icon (

) when set to [On], indicating that the image on

the screen is being magnified.

[OIS Functions]:

Displays the image stabilizer icons (

) and axis shift icon (

) when set to [On].

[Custom Display 2] settings

[Remaining Battery]:

Controls when the remaining battery indicator appears.

[Normal]: Always appears on the screen.

[Warning]: Appears only when there is a warning.

[Remaining Rec Time]:

Displays the remaining recording time.

[Normal]: Always appears on the screen.

[Warning]: Appears only when there is a warning.

[Rec Mode]:

Displays the recording operation indicator ([STBY] in record pause mode, for example) when set

to [On].

[Genlock]:

Displays the Genlock icon (

) when set to [On].

[Time Code]:

Displays the time code when set to [On].

[Interval Counter]:

Displays the countdown during interval recording mode when set to [On].

Summary of Contents for XF100



























































































































































































Search results

Summary of Contents for XF100

Reviews:

Related manuals for XF100

Brands by name

Popular brands

Canon XF100, Instruction Manual

Search results

Summary of Contents for XF100

Reviews:

Related manuals for XF100

Brands by name

Popular brands