Recording Audio
77
Microphone Sensitivity (Built-in Microphone)
You can increase the built-in microphone’s sensitivity.
1 Select [Built-in Mic Sensitivity].
>
[
C
"
Audio Setup]
>
[Built-in Mic Sensitivity]
2 Select the desired option and then select [
X
].
Options
Microphone Attenuator (Built-in Microphone or MIC Terminal)
If the audio level is too high and the audio sounds distorted while recording with the built-in
microphone or external microphone (MIC terminal), activate the microphone attenuator (20 dB) for the
respective microphone.
1 Select [Built-in Mic Att.] or [MIC Att.].
>
[
C
Audio Setup]
>
[Built-in Mic Att.] or [MIC Att.]
2 Select the desired option and then select [
X
].
Options
Low-Cut Filter (Built-in Microphone or MIC Terminal)
You can activate the low cut filter to reduce the sound of blowing wind, a car’s engine and similar
ambient sounds. When recording in surroundings unaffected by wind or if you want to record low-
frequency sounds, we recommend turning off the low-cut filter.
1 Select [Built-in Mic Low Cut] or [MIC Low Cut].
>
[
C
!
Audio Setup]
>
[Built-in Mic Low Cut] or [MIC Low Cut]
2
Select [
i
On] and then select [
X
].
[
h
Normal]:
For recording audio under usual conditions.
[
High]:
For recording audio at a higher level (+6 db).
[
i
On]:
The microphone attenuator will be activated at all times to reproduce more
faithfully the sound dynamics.
å
will appear on the screen.
[
j
Off]:
The microphone attenuator will be deactivated at all times.
