Canon XA60 Instruction Manual Download Page 44

Page: 44 / 157

Shooting Modes

NOTES

• [

Portrait]/[

Sports]/[

Snow]/[

Beach]: The picture may not appear smooth during

playback.

• [

Portrait]: The blur effect of the background increases the more you zoom in (

• [

Snow]/[

Beach]: The subject may become overexposed on cloudy days or in shaded places.

Check the image on the screen.

• [

Low Light]:

- Moving subjects may leave a trailing afterimage.
- Picture quality may not be as good as in other modes.
- White points may appear on the screen.
- Autofocus may not work as well as in other modes. In such case, adjust the focus manually.

• [

Low Light]/[

Fireworks]: To avoid camcorder blur (blur due to the camcorder moving) we

recommend using a tripod.

[

Fireworks]

To record fireworks.

Summary of Contents for XA60






























































































































































Search results

Summary of Contents for XA60

Reviews:

Related manuals for XA60

Brands by name

Popular brands

Canon XA60, Instruction Manual

Search results

Summary of Contents for XA60

Reviews:

Related manuals for XA60

Brands by name

Popular brands