Menu Options
109
[Output Status]:
Displays a screen where you can verify the standard of the output signal from the SDI
OUT (
s
only) terminal or HDMI OUT terminal.
[LCD Brightness]:
Adjusts the brightness of the LCD screen.
• Changing the brightness of the LCD screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
[LCD Backlight]/[Viewfinder Backlight]:
Sets the screen to one of three brightness levels (for the LCD
screen) or two brightness levels (for the viewfinder).
• Changing the brightness of the screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
• Using the [
Bright] setting will shorten the effective usage time of the battery pack.
[LCD Mirror Image]
: When this setting is set to [
i
On], this function reverses the image on the screen
horizontally when you rotate the LCD panel 180 degrees toward the subject. In other words, the
screen will show a mirror image of the subject.
• If the camcorder, optional remote controller or a commercially available remote control is operated
while the mirror image is displayed, the mirror image will deactivate temporarily for approximately 4
seconds.
[Output Onscreen Displays]:
When set to [
i
On], the camcorder’s onscreen displays will appear also
on the screen of a TV or monitor connected to the camcorder.
[Onscreen Markers]:
You can display a grid or a horizontal line at the center of the screen. Use the
markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally).
• Onscreen markers are not available when magnification is activated.
• Using the onscreen markers will not affect the recordings.
[Distance Units]:
Selects the units to use for the focusing distance display while focusing manually. This
setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.
[Onscreen Markers]
[
j
Off], [
4
Level (Gray)], [
3
Level (White)],
[
6
Grid (Gray)], [
5
Grid (White)]
–
–
[Distance Units]
[
.
meters], [
/
feet]
–
Menu item
Setting options
A
