Canon WUX500ST, User Commands

Page: 84 / 95

WUX500ST User Commands
-81-
SAVEIMGPROF
User memory creation/storage/deletion
Format
Setting Command SAVEIMGPROF=<User memory save to parameter:ID>
Response i:OK
Reference Command GET=SAVEIMGPROF
Response g:SAVEIMGPROF=<Number of user memories>:<User 1 present
parameter>,<User 2 present parameter>,<User 3 present
parameter>,<User 4 present parameter>,<User 5 present parameter>'
Note: See "Error list" for any response other than the above.
< User memory save to parameter:ID >
Parameter Meaning
USER_1 Save to User 1
USER_2 Save to User 2
USER_3 Save to User 3
USER_4 Save to User 4
USER_5 Save to User 5
DEL_ALL Delete all User memory
< User memory presence parameter:ID >
Parameter Meaning
0 User memory not created
1 User memory created
Environment
Power mode restriction Input
LAN WiFi RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB No
signal No No No No Yes No No No No Yes No No Yes Yes Yes Yes Yes Yes Yes Yes Yes
Example
(Setting)
>SAVEIMGPROF=USER_2
< i:OK
(Reference)
> GET=SAVEIMGPROF
< g:SAVEIMGPROF=5:1,0,1,0,0
Note: '>' indicates a command; '<' indicates a response.