WUX500ST
User Commands
-14-
Environment
This defines the environments that support the command (power supply state, input signal state).
The command is executable when the projector is in the mode indicated by "Yes" in the table of
corresponding command description page.
Power mode restriction
Input*11
LAN*1
WiFi*7
RS-232C*8
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No
signal
*2 *3 *4 *5 *6 *2 *3 *4 *5 *6 *9 *5 *6
*10
*10
*10
*10
*10
*10 *10
*10
*1 Power mode restriction/LAN
Indicates whether the command coming through LAN is executable.
*2 SL0
Standby mode, and the network function is turned off.
When the network function is turned off, the command is not executable if coming
from
LAN, in which case, this should never be “Yes”.
*3 SL1
Standby mode, and the network standby setting is set to "Eco."
*4 SL3
Standby mode, and the network standby setting is set to "Normal."
*5 PM
Power management “lamp off” standby
*6 ON
Normal projection status
*7 Power mode restriction/WiFi
Indicates whether the command coming through wireless LAN is executable.
Wireless LAN function is disabled in standby mode (SL 0, SL 1, SL 3). (Command
response does not return.)
Wireless LAN function is invalid when power management
“lamp off” sets to standy.
(Command response does not return.)
*8 Power mode restriction/RS-232C
Indicates whether the command coming through RS-232C is executable.
*9 ST
Standby mode (includes SL0, SL1 and SL3 altogether, regardless of the network
setting).
*10 Input
Valid when the projector is in the input signal mode indicated by "Yes". Invalid when
the projector is in the input signal mode indicated by "No".
Remarks
Remarks about the command is inserted when necessary.
Example
Specific example of the command is inserted when necessary.
