WUX500ST
User Commands
-2-
2. Communication Specifications
Communication Specifications
The projector can be controlled via RS-232C, wired LAN, HDBaseT, or wireless LAN connection.
PC - Projector connection configuration
RS-232C connection
Wired LAN connection
Item
Specification
Item
Specification
Connection
system
PC and projector connected on a "1:1"
basis
Connection
system
TCP/IP connection
Connection
signal line
3-line connection of SD, RD, and SG
Connection
signal line
Straight when connecting via network
Connection
cable
9-pin RS-232C cable (crossover)
Connection
cable
LAN cable
LAN
1000BASE-T
100BASE-TX
10BASE-T
HDBaseT connection
Wireless LAN connection
Item
Specification
Item
Specification
Connection
system
HDBaseT connection
Connection
system
802.11bgn
Connection
cable
LAN cable
* Signal lines other than the three SD, RD, and SG lines are not used in the projector.
* Loop back its own signals on the PC side as necessary.
* To use the wired LAN connection, on the projector, the wired side of "network (wired/wireless)" must be
turned on.
* To use the HDBaseT connection, on the projector, HDBaseT must be turned on and serial communication
must be set to HDBaseT.
SD
SD
RD
RD
SG
SG
送信データ
送信データ
受信データ
信号用設置
信号用設置
受信データ
Send Data
Receive Data
Signal Ground
Send Data
Receive Data
Signal Ground
Projector
SERVICE
PORT
Network connection
LAN PORT
LAN PORT
RS-232C
crossover cable
クロスｹｰﾌﾞﾙ
PC
HDBaseT TX
COM PORT
HDBaseTCOM PORT
PC
PC
COM PORT
Wireless LAN
connection
PC
