Canon WUX500ST, User Commands

Page: 91 / 95

WUX500ST User Commands
-88-
TPTN
Test pattern
Format
Setting Command TPTN=<Test pattern parameter:ID>
Response i:OK
Reference Command GET=TPTN
Response g:TPTN=<Test pattern parameter:ID>
Note: See "Error list" for any response other than the above.
< Test pattern parameter:ID>
Parameter Meaning
OFF Turned off
CB1 Color bar
SSH1 Stair step H No.1
SSH2 Stair step H No.2
SSH3 Stair step H No.3
SSV1 Stair step V No.1
SSV2 Stair step V No.2
SSV3 Stair step V No.3
RTF1 Raster 100% White
RTF2 Raster 100% Red
RTF3 Raster 100% Green
RTF4 Raster 100% Blue
RTH1 Raster 50% White
RTH2 Raster 50% Red
RTH3 Raster 50% Green
RTH4 Raster 50% Blue
SSC1 Stair step color
CKR1 Checker No.1
CKR2 Checker No.2
MUL1 Multi No.1
MUL2 Multi No.2
CHR1 Character
FCS1 Focus
BDR1 Border
CRS1 Cross hatch 8 divided
CRS2 Cross hatch 12 divided
CRS3 Cross hatch 4 divided
Environment
Power mode restriction Input
LAN WiFi RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB No
signal No No No No Yes No No No No Yes No No Yes Yes Yes Yes Yes Yes Yes Yes Yes
Example
(Setting)
> TPTN=OFF
< i:OK