16
1
Select [Automatic] or [Manual] and then
press SET.
If you selected [Automatic], IP settings will be
assigned automatically. Continue with the
procedure to review and save the configuration
(
A
17).
2
Enter the network’s TCP/IP settings
manually.
Enter the IP address assigned to the camera and
the network’s subnet mask.
If necessary, push the joystick left to select the
field you wish to change. Push the joystick up/
down or turn the SELECT dial to select a value
and press SET to move to the next field. After
completing the four fields of an address, select
[Set] and press SET to enter the address.
For details about the network’s settings, consult
the network administrator.
After entering the subnet mask, continue with the
procedure to review and save the configuration
(
A
17).
Configuring Network (TCP/IP) Settings
