Canon Vizcam 1000, User Manual

Page: 152 / 278

8-8
Using the Telephone, an Answering Machine, and a Modem Chapter 8
7. Press
START/COPY
.
8. Press the numeric buttons to enter the number of seconds you
want the MultiPASS 1000 to wait before switching to automatic
receiving.
❏
You can choose from 1 to 99 seconds. The number of
seconds you choose must be less than the time it takes the
answering machine to hang up the phone after the caller
finishes leaving a message. (This will depend on the model
of the answering machine.)
❏
In this example, the MultiPASS 1000 will switch to fax
mode after four seconds of silence.
9. Press
START/COPY
.
10. Press
STOP
.
N
If your answering machine does not record at all or does not finish
recording the voice message, change the
ANS/FAX SWITCH
to
OFF
.
When the
ANS/FAX SWITCH
is set to
OFF
, the MultiPASS 1000
switches to automatic receiving only for fax machines that use
CNG (calling tone). Some fax machines (especially older models)
do not send a CNG tone. In this case, you need to set the
ANS/FAX
SWITCH
to
ON
.
ANS/FAX SWITCH TIME
DATA ENTRY OK
ANS/FAX SWITCH TIME
4