Canon Vizcam 1000, User Manual

Page: 119 / 278

Chapter 6 Using Automatic Dialing
6-17
Using Directory Dialing
To dial any fax or telephone number that is registered for one-
touch or coded speed dialing, you can use directory dialing.
Directory dialing is similar to using a telephone book because it
allows you to look up a number by the name under which it is
registered.
You must make entries for directory dialing within 60 seconds
after starting or the MultiPASS 1000 returns to standby mode.
1. When you reach a step asking you to dial, press the
CODED
DIAL/DIRECTORY
button in the middle of the operation panel
two times.
❏
Be sure to press the
CODED DIAL/DIRECTORY
button twice.
2. Press the numeric button with the letter corresponding to the
first letter of the name you want to recall. The display shows
the first name in the fax or telephone name list that begins with
that letter.
❏
If the name begins with a number or symbol, first press
the
#
button to view the names.
❏
If no names are listed under the letter you choose, the
display shows a message similar to this:
3. Press the arrow buttons until the name whose number you
want to dial appears on the display.
❏
To search the list in alphabetical order, press
<
.
❏
To search the list in reverse alphabetical order, press
>
.
4. When the name you want to send to or call appears, press
START/COPY
.
< >
[ T U V ]
NOT FOUND!
SEARCH TEL DIRECTORY
Using Automatic
Dialing