Canon VB-S30VE Operation Manual Download Page 86

Page: 86 / 238

Security

Memory Card (P. 194)

Maintenance

• User Management (P. 91)

The settings of this item are the same as those of the [User

Management] in [Basic] menu. Settings configured on one

page are also reflected on the other.

• Host Restrictions (P. 183)

Separate access control from IPv4 and IPv6 addresses

can be set.

• SSL/TLS (P. 185)

Certificate creation and management, and encrypted

communication settings.

• 802.1X (P. 188)

Settings for 802.1X authentication and authentication

status display, and for certificate management.

• IPsec (P. 190)

Settings for using IPsec.

Settings for recording video to a memory card when an event

is triggered.

The settings of this item are the same as those in [Video

Record] > [Memory Card]. Settings configured on one page

are also reflected on the other.

• General (P. 197)

Check the device information/settings, and licenses, and

reboot and initialize the device, etc.

• Backup / Restore (P. 199)

Perform backup and restoration.

• Update Firmware (P. 200)

Perform firmware updates.

• Log (P. 201)

Display logs and configure log notification.

User Page

Link to web page customized by the user.

For information on the User Page, contact a Canon Customer Service Center.

Event

• External Device (P. 147)

Operation settings for external device output and for

external device input triggered events.

• Audio Detection (P. 150)

Detected changes in audio input from the built-in

microphone can trigger operations such as video

recording or e-mail notification.

• Timer (P. 152)

The timer function can generate events that can trigger

operations, such as video recording and e-mail

notifications, at regular intervals.

• Intelligent Function (P. 154)

Configure the intelligent functions such as moving object

detection, camera tampering detection, and intrusion

detection.

• Switch Day/Night (P. 178)

The camera angle can be moved to preset positions when

Day Mode and Night Mode are switched.

• Linked Event (P. 179)

By linking two types of events, a single event is triggered.

Summary of Contents for VB-S30VE















































































































































































































































Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands

Canon VB-S30VE, Operation Manual

Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands