Canon VB-S30VE Operation Manual Download Page 198

Page: 198 / 238

198

• Private Key

If you set this to [Do not save], the above settings are also initialized.

Since the administrator account is also initialized, you will become unable to connect to the camera. Use the Camera

Management Tool to configure the initial settings (P. 36).

[Revert to Initial Settings]

The initial settings are restored according to the selection in [Network Settings] after rebooting.

Note

• It is recommended that you back up each current setting before you click [Exec] in [Revert to Initial Settings].

• The camera can also be restored to factory default settings using the reset switch. Note, however, that this will reset all camera settings

to factory default settings except for date and time (P. 222).

Summary of Contents for VB-S30VE















































































































































































































































Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands

Canon VB-S30VE, Operation Manual

Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands