Canon VB-S30VE Operation Manual Download Page 162

Page: 162 / 238

162

The non-detection area settings added in [Non-detection Area Settings] are displayed and [Enable non-detection

area] is selected.

Note

• Up to five non-detection area settings can be registered.

• To disable non-detection area settings, clear the [Enable non-detection area] checkbox.

• To delete non-detection area settings, select the non-detection area settings to delete and click [Delete] in Non-detection Area

Settings (List).

Click the mouse to create a polygon. For information on the creation method, please refer to “Using [Polygonal]”

(P. 164).

Click [Add].

Set a non-detection area in the video display area.

Summary of Contents for VB-S30VE















































































































































































































































Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands

Canon VB-S30VE, Operation Manual

Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands