Canon VB-S30VE Operation Manual Download Page 178

Page: 178 / 238

178

When events trigger the switching of Day/Night Mode, presets registered in advance can be executed, such as changing

the camera angle or video quality settings.

Day/Night Mode Switching

[Preset when Switching to Day Mode]

Executes the preset when switched to Day Mode.

[Preset when Switching to Night Mode]

Executes the preset when switched to Night Mode.

Note

• It is necessary to set presets beforehand with [Camera] > [Preset] (

P. 118

• You can set the timing for event-triggered Day/Night Mode switching in [Switch Day/Night] in [External Device Input] (P. 148) or [Timer]

(P. 152).

[Event] > [Switch Day/Night]
Executing Presets When Switching Day/Night Mode

Important

When the user has camera control privileges, the presets for [Preset when Switching to Day mode] and [Preset when Switching to Night
Mode] will not run.

The following settings can be configured here.

• Day/Night Mode Switching

Summary of Contents for VB-S30VE















































































































































































































































Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands

Canon VB-S30VE, Operation Manual

Search results

Summary of Contents for VB-S30VE

Reviews:

Related manuals for VB-S30VE

Brands by name

Popular brands