Canon varioPRINT 135 Series Operation Manual Download

Page: 297 / 454

Setting

Values

Description

[Folding]

[None]

[Z-fold]

Required output location for Z-folded A4R, Let-
terR and Legal:
• Folder output tray, or
• Any output tray of the stacker/stapler.

NOTE

Z-folded A3, B4 and Tabloid 11" x 17"
sheets must be sent to the stacker/
stapler.

[Z-fold large sheets
only]

Required output location for Z-folded A3, B4
and Tabloid 11" x 17": Any output tray of the
stacker/stapler.

[Tri-fold in]

Required output location: Folder output tray

[Tri-fold out]

Required output location: Folder output tray

[Parallel fold]

Required output location: Folder output tray

[Print method]

Use the [Print method] option to define on
which side to print:
• [Print inside]
• [Print outside]

Check the preview for the result of the selec-
tion.

[Trimming]

This option is only available when you have a trimming unit connected.

Overview of the Available Settings for DocBox Jobs

296

Chapter 9 - Use the DocBox (Option)

Canon varioPRINT 135 Series

Summary of Contents for varioPRINT 135 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for varioPRINT 135 Series

Reviews:

Related manuals for varioPRINT 135 Series

Brands by name

Popular brands

Canon varioPRINT 135 Series, Operation Manual

Search results

Summary of Contents for varioPRINT 135 Series

Reviews:

Related manuals for varioPRINT 135 Series

Brands by name

Popular brands