manualshive.com logo in svg

Canon varioPRINT 135 Series, Operation Manual

The Canon varioPRINT 135 Series is a cutting-edge printing solution equipped with advanced features. Ensure smooth and efficient operation by accessing the comprehensive operation manual. Download this manual for free from our website and unleash the full potential of your Canon varioPRINT 135 Series printer.

Share
Download
background image

[Output] Settings - [Shift]

Setting

Values

Description

[Shift]

[Margin shift]

Use this setting to increase or decrease the mar-
gin. By default, the values of the front side and the
back side are interlocked. This means that the val-
ues for the front side and the back side remain
identical.
Widening the margin can be useful if you want to
staple or punch the output, for example. Narrow-
ing the margin can be useful if you do not need
additional space for stapling or punching the out-
put, for example.
If you want to define a different value for each
side, press  . The icon changes to the unlocked sta-
tus. Now you can define the values for the front
side and the back side separately.

[Image shift]

Use this setting to shift the image horizontally or
vertically. By default, the values of the front side
and the back side are interlocked. This means that
the values for the front side and the back side re-
main identical.
If you want to define a different value for each
side, press  . The icon changes to the unlocked sta-
tus. Now you can define the values for the front
side and the back side separately.

Description of the Copy Job Settings

226

Chapter 7 - Carry Out Copy Jobs

Canon varioPRINT 135 Series

Summary of Contents for varioPRINT 135 Series







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for varioPRINT 135 Series

Brands by name

Popular brands

Load more brands