Canon Shift Tray-E1, Service Manual

Page: 27 / 31

6
6
6-3
6-3
Checking before Installation
Check that the main power switch is OFF.
1 Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and then
disconnect the power plug.
Installation Procedure
1) Free the Reader Communication Cable and the Reader Power Supply Cable from the 2
Wire Saddles.
2) Remove the Left Rear Cover.
2 Protrusion
•
F-6-2 F-6-2
3) Open the Toner Replacement Cover.
4) Remove the 2 Finisher Connection Covers. (The removed Finisher Connection Cover will
not be used.)
1 Claw each
x2
5) Remove the Left Upper Cover.
3 Screws
3 Claws
3 Protrusions
x3
•
•
•
•
F-6-3 F-6-3
F-6-4 F-6-4