Canon Shift Tray-E1, Service Manual

Page: 19 / 31

4
4
4-9
4-9
x2
9. Remove the Reinforcing Plate.
Screw (RS Tightening; M4x20)
Protrusion
Removing the Shift Tray Driver PCB
1. Free the 2 retaining claws [1], and detach the cable retaining plate [2].
•
F-4-19 F-4-19
F-4-20 F-4-20
[1]
[2]
2. Remove the 2 screws [3], and detach the 2 tray full sensors [4] and the 2 grounding wires.
3. Free the cable of the tray full sensor from the clamp [5], and disconnect the connector [6].
F-4-21 F-4-21