66
Camera Setup
Set up factory-set remote cameras connected to the network in one go.
Network
Perform the device’s network settings.
Setting item
Setting values/description
Search
Searches for factory-set cameras among cameras on the same network. Found
cameras are reflected in the [Target Camera] list.
Target Camera
When setting up only one camera, selects the camera to be set up from the factory-
set cameras found using [Search].
Administrator Name
Inputs the administrator name to be set for the camera (5 to 15 alphanumeric
characters and symbols).
Password
Inputs the password to be set for the camera (8 to 32 characters – must contain two
of the following: letters, numbers or symbols).
IPv4 Setting Method
Auto (DHCP)
, Manual
Selects an IPv4 address setting method.
Confirm Password
Inputs the password for verification.
IPv4 Address
0.0.0.0 to 255.255.255.255
Inputs the starting IPv4 address.
Subnet Mask
Inputs the subnet mask.
Default Gateway
Inputs the default gateway. If 0.0.0.0 is input, it will be set to “none”.
Apply
Sets up the camera selected in [Target Camera] or all found cameras at once. For all
found cameras, if [IPv4 Settings Method] is [Manual], the IP addresses of the second
and subsequent cameras are set in order by adding 1 (or more) to the address set in
[IPv4 Address].
Setting item
Setting values/description
IPv4 Setting Method
DHCP / AutoIP
, Manual
Selects an IPv4 address setting method.
IPv4 Address
0.0.0.0 to 255.255.255.255 (
192.168.100.254
)
Inputs the IPv4 address.
Subnet Mask
0.0.0.0 to 255.255.255.255 (
255.255.255.0
)
Inputs the subnet mask.
Default Gateway
0.0.0.0 to 255.255.255.255 (
0.0.0.0
)
Inputs the default gateway address.
Apply
Saves the device’s IPv4 address settings.
IPv6 Address
Inputs the IPv6 address (up to 39 lowercase letters, numbers and “:”).
Prefix Length
16 to 128 (
64
)
Inputs the IPv6 prefix length.
Default Gateway
Inputs the IPv6 default gateway address (up to 39 lowercase letters, numbers and
“:”).
Apply
Saves the device’s IPv6 address settings.
Application Control
HTTPS, HTTP
/HTTPS, Off
Selects whether to allow control of the controller from an external device and the
available communication protocol.
User Name
Inputs the device’s user name (5-15 alphanumeric characters or symbols) when
accessing from an external device.
Password
Inputs the device's password (8 to 32 characters – at least two character classes
from letters, numbers or symbols are required) for access from an external device.
Controller Name
Up to 15 alphanumeric characters/symbols (
Controller
).
Inputs the controller name.
