38
Network Settings for the Device
Perform network settings on the device in order to control IP connected cameras.
• The IPv4 address obtained with DHCP or AutoIP is set automatically.
• When setting the IPv4 address manually, select [Manual] and perform the following settings.
– [IPv4 Address]
– [Subnet Mask]
– [Default Gateway]
For reference: “Inputting the IP Address” (P. 41)
– [IPv6 Address]
– [Prefix Length]
– [Default Gateway]
Note
For settings information when performing manual settings, contact the system administrator.
Connection Settings for the Device
1
S
elect the
S
Y
S
TEM menu > [Network] tab.
2
S
elect [DHCP/AutoIP] for [IPv4
S
ettings Method].
3
S
elect [Apply].
4
When connecting to an IPv6 network, select [Apply] after performing the following settings.
