2
2
2-7
2-7
Controls > Punch operation
Controls > Punch operation
Punch operation
The hole puncher is driven by the punch motor (M102). The home position of the hole
puncher is detected by the punch position sensor (S102) and punch HP sensor (S104). Home
position is reached when the two sensors both detect the sensor flag.
Punch operation is performed by driving the rack gear back and forth with the punch motor
(M102) and lifting the hole puncher through the punch lifter pin. The rack gear has sensor
flags and the punch operation is detected by the combination of these sensor flags and 3
sensors (punch position sensor (S102), punch 2-/3-hole sensor (S103), and punch HP sensor
(S104)).
The items controlled by the combination of sensor flags and sensors are shown below.
If 2 hole type/2 hole type Puncher Unit-BF1/2 hole type Puncher Unit-BG1/Puncher Unit-BH1.
Hole puncher condition
Punch HP sensor
(S104)
Punch position
sensor (S102)
Punch 2-/3-hole
sensor (S103)
Home position
(raised
position)
Hole
punching
operation;
1 cycle
ON
ON
OFF
Lowered
position
OFF
OFF
OFF
Raised
position
ON
OFF
OFF
•
If 3 hole type Puncher Unit-BF1/4 hole type Puncher Unit-BG1. The rack gear of the
puncher unit that punches two types of holes is driven back and forth from the home
position in the range opposite to the above.
Hole puncher condition
Punch HP sensor
(S104)
Punch position
sensor (S102)
Punch 2-/3-hole
sensor (S103)
Home position
(raised
position)
Hole
punching
operation;
1 cycle
ON
ON
OFF
Lowered
position
OFF
ON
ON
Raised
position
ON
OFF
ON
Hole puncher (punch blade)
Punch blade up/down
support pin
Dies
Rack gear
Sensor flag
S104
S102
S103
Summary of Contents for Puncher Unit-BE1
