Canon Powershot SX40 HS Getting Started Download Page 54

Page: 54 / 265

Inserting the Battery and Memory Card

Remove the battery.

Open the cover and press the battery lock
in the direction of the arrow.

The battery will pop up.

Remove the memory card.

Push the memory card in until you hear a
click, then slowly release it.

The memory card will pop up.

Number of Shots per Memory Card

•

Values are based on the default settings.

•

The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.

Removing the Battery and Memory Card

Memory Card

4 GB

16 GB

Number of Shots

Approx. 1231

Approx. 5042

Can you check the number of shots that can be taken?

You can check the number of shots that can be
taken when the camera is in a Shooting mode
(p. 25).

COP

Summary of Contents for Powershot SX40 HS










































































































































































































































































Search results

Summary of Contents for Powershot SX40 HS

Reviews:

Related manuals for Powershot SX40 HS

Brands by name

Popular brands

Canon Powershot SX40 HS, Getting Started

Search results

Summary of Contents for Powershot SX40 HS

Reviews:

Related manuals for Powershot SX40 HS

Brands by name

Popular brands