Canon Powershot SX40 HS Getting Started Download Page 217

Page: 217 / 265

Using an Externally Mounted Flash (Sold Separately)

181

These flashes enable you to shoot scenes brightly and allow for a wider range
of flash photography to suit your purposes.

Attach the flash to the hot shoe.

Turn the flash on, then turn the
camera on.

A red

appears on the screen (or the

viewfinder).

When the flash is charged, its pilot lamp
will light.

Set the camera to

mode.

Set the white balance to

(p. 80).

Configure the externally mounted
flash.

Press the

button to choose [Flash

Control] in the

tab, then press the

button.

The options set on the flash will appear.

Press the

buttons or turn the

dial

to choose an item, then press the

buttons to adjust the setting.

The available settings differ depending on
the shooting mode and attached flash
(p. 183).

Speedlite 580EX II/430EX II/320EX/270EX II/

270EX

COP

Summary of Contents for Powershot SX40 HS










































































































































































































































































Search results

Summary of Contents for Powershot SX40 HS

Reviews:

Related manuals for Powershot SX40 HS

Brands by name

Popular brands

Canon Powershot SX40 HS, Getting Started

Search results

Summary of Contents for Powershot SX40 HS

Reviews:

Related manuals for Powershot SX40 HS

Brands by name

Popular brands