Using the Wireless Networking Function
104
"Connection failed 7" Message
Cause
More than approximately 1000 images in the camera, you may not be able to
download the camera images in this case.
Solution:
Use a memory card reader to download the images. (p. 22)
"Disconnected" Message
Cause
Could not detect the access point for the target device.
Or the wireless network environment was poor and the connection was
broken.
Or connection confirmation signal processing failed.
Solution 1:
Change the camera's orientation.
Solution 2:
Bring the camera near the wireless LAN router or other access point device.
Solution 3:
Confirm that the wireless LAN router or other access point device is
operating.
See the user guide for the wireless LAN router or other access point device.
Solution 4:
Change the channel of the wireless LAN router or other access point device.
Solution 5:
C
onfirm that the target device's (computer's) wireless networking function is
operating correctly.
Solution 6:
Enable the receipt of an ICMP echo request in your firewall settings.
See
Enabling the Receipt of ICMP Echo Requests
(p. 105) for details.
