Canon PIXMA TS6300 Series Online Manual Download Page 288

Page: 288 / 460

Note

• To show the password, select

. To hide the password, select

OFF

• The password is required when connecting a device to the printer. Depending on the device you

are using, no password is required.

• When you connect a Wi-Fi Direct compatible device to the printer, select the device name

displayed on the LCD from your device.

• To update the identifier (SSID) and the password, see below.

Changing Wireless Direct Setting

Changing Settings of a Device and Connecting It to the Printer

Turn on Wi-Fi function on your device.

Enable "Wi-Fi" on your device's "Setting" menu.

For more on turning on Wi-Fi function, see your device's instruction manual.

Select "DIRECT-XXXX-TS6300series" ("X" represents alphanumeric characters) from list
displayed on your device.

Note

• If "DIRECT-XXXX-TS6300series" does not appear on the list, Wireless Direct is not enabled.

See

Changing Printer Setting to Use Wireless Direct

to enable Wireless Direct.

Enter password.

Your device is connected to the printer.

Note

• Check the password for the Wireless Direct.

Check by one of the following methods.

Display on the LCD of the printer.

LAN settings

Print the network settings.

Printing Network Settings

• Depending on the device you are using, entering the password is required to connect a device

to the printer via Wi-Fi. Enter the password specified for the printer.

• If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting

to the printer, the printer displays a confirmation screen asking if you allow the device to
connect to the printer.

Make sure the name on the LCD is the same as that of your wireless communication device
and select

Yes

288

Summary of Contents for PIXMA TS6300 Series













































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS6300 Series

Reviews:

Related manuals for PIXMA TS6300 Series

Brands by name

Popular brands

Canon PIXMA TS6300 Series, Online Manual

Search results

Summary of Contents for PIXMA TS6300 Series

Reviews:

Related manuals for PIXMA TS6300 Series

Brands by name

Popular brands